Automatic screening, Calibration reminder, Messages – Xerox 242 User Manual
Page 180: Accounting log setup
172
Chapter 7 – System Administration
Automatic Screening
The Spire CX260 supports Dot and Stochastic screening. When you print a job from
the Spire CX260, select the automatic screening method. By default, automatic
screening applies two types of screen:
•
For text or line-art elements (line work), the system uses line type screen of
200C.
•
For continuous tone (CT), the system uses dot type screen of
200C.
To change the values of the automatic screening method:
1.
In the Settings window, select
Color.
2.
Select the required setting for LW from the
LW list.
3.
Select the required setting for CT from the
CT list.
You are prompted to restart the application for the new settings to take effect.
Calibration Reminder
Set the Calibration Reminder to remind you when to perform a calibration.
1.
In the Settings window, select
Color.
2.
In the
Calibration Reminder area, select the Set calibration reminder every
(hours) check box and select the number of hours in the list.
The calibration reminder indicator appears when it is time to calibrate.
Messages
Accounting Log Setup
By default, all the jobs that were handled during the past 90 days are listed in the
Spire CX260 Accounting window. This utility enables you to specify different values
for how long information remains before being overwritten.