Xerox 242 - Manual (Page 137)

Calibration 129
8. Set the number of copies you need by typing the number or using the arrows
next to the box to select the number.
9. Click Print.
The Start Point Density calibration chart is printed.
10. Collect the chart(s) from the printer.
Step 2 of the Color Calibration Wizard appears. In this step you scan the start
point chart so that the wizard can measure each separation and find the point at
which the toner appears on the paper.
Note: Since the performance of the Xerox DocuColor 242/252/260
printer/copier is best after several pages have been printed, it is
recommended that you print at least 10 copies of the first calibration chart
and use one of the last copies printed.
Note: If you selected Automatic as the Screening Method in Step 1 of the
wizard, the Xerox DocuColor 242/252/260 printer/copier prints two
charts, an Image Density Calibration chart and a Text/Line Art chart.