Xerox 242 - Manual (Page 171)

Setting Up and Configuring the Spire CX260 163
System Disks
When the Printer or User Disks reach a pre-defined threshold of minimum available
space (the default is 250 MB), RIP is suspended and the system provides a warning
message. The RIP will resume automatically only after disk space is available.
1. In the Settings window, select System Disks.
2. To set the system disks threshold, in the System disks area, set the minimum
free disk space desired for RIP.
Backing up the Configuration
You can back up the Spire CX260 configuration to a local hard disk, network drive,
or external media—for example, an external zip drive—connected to the Spire
CX260.