NorthStar Navigation NorthStar 8000i - Manual (Page 70)

70 Northstar 8000i Operation Manual
3. To display details about the event mark, (such as the latitude and
longitude) select the event mark then select Waypoint Details.
The 8000i displays the Waypoint Details box with some details already
entered for the event mark.
4. The new waypoint is stored in the Waypoint Library.
10.3 Select and show a waypoint on the chart
You can select a waypoint from the Waypoints Library and show it on your Chart
screen.
To select and show a waypoint:
1. Display the Chart screen and the control panel. If you can't see the
Waypoints Routes & Tracks button, select Return.
2. Select
Waypoints Routes & Tracks.
3. Select
Waypoints Library. The Waypoints Library box is displayed
only on your Chart screen. It lists all the stored waypoints.
4. Select the waypoint that you want to show on the Chart screen.
5. The
Display On Chart button in the control panel shows the
current setting. If it's Off, toggle it On.
6. Select
Find on Chart from the control panel. The 8000i
immediately shows the Chart screen with the selected waypoint
displayed in the center.
10.4 Hide a waypoint
This works only for a waypoint that is not part of a route.
To hide a waypoint:
1. Display the Chart screen and the control panel.
2. Select the waypoint, then select Hide Waypoint.
10.5 Delete a waypoint
Use this to delete a waypoint that is not part of a route, but is shown on the Chart
screen.
If you want to delete a waypoint that is part of a route, (see "Remove a waypoint
from a route using the Routes Library" page 79)
To delete a waypoint:
1. Display the Chart screen and the control panel.
2. Select the waypoint you want to remove. The 8000i circles the
waypoint and displays a new control panel.
3. Select
Delete Waypoint. The waypoint is immediately removed
from the Chart screen.