NorthStar Navigation NorthStar 8000i - Manual (Page 19)

Northstar 8000i Operation Manual 19
2.2 Turn off the 8000i
To turn off the 8000i using a 12" Display Processor:
1. Hold down the Power key. The Northstar 8000i countdown screen
appears, then the 12" Display Processor turns off automatically. (If you
want to cancel shutdown, just release the button.)
To turn off the 8000i using a 15" Monitor (preferred method):
Use this method when the Black Box Processor and the 15" Monitor are both wired
together as recommended in the 15’’ Installation Manual.
1. Hold down the Power key on the 15" Monitor for about three seconds
to turn off the 8000i.
To turn off the 8000i using a 15" Monitor (alternative method):
Use this method when the Black Box Processor and the 15" Monitor are wired
independently.
1. Hold down the Power key on the 15" Monitor for about three seconds
to turn off the 15" Monitor.
2. Hold down the Power (ON/OFF) key at the back of the Black Box
Processor until the red Power LED goes out.
2.3 The keys on the 15 inch Monitor
The "keys" are physical keys that you can depress. The following keys are shown on
your 15" Monitor:
Key Function when NOT in
OSD mode Function in OSD mode
A Power Press once to turn on. Hold down for three seconds to turn off.
If correctly wired using the Remote Power On feature this key also
controls the power status of the Northstar 8000i Black Box Processor
B Up Arrow Press to step up through the
other video input source options.
Press once to step up through
the OSD options.
C Down
Arrow
Press to show the current video
input source in the top left corner
of the screen.
Press again to step down through
the other video input source
options.
Press once to step down through
the OSD options.