NorthStar Navigation NorthStar 8000i - Manual (Page 42)

42 Northstar 8000i Operation Manual
8. Remove the memory stick from the 8000i master unit and take it to an
authorized dealer.
9. The dealer will load the license code file onto your memory stick.
10. Insert the memory stick into the 8000i master unit.
11. You're now ready to load the license codes and unlock the chart
collections. See "Load the chart licenses".
5.11 Load the chart licenses
This works only when the dongle with the license code file is connected to the
8000i master unit.
To load the chart licenses:
1. Select
Display, then Setup.
2. Select
+ Chart, then C-Map Chart Manager.
3. When you're in the C-MAP PRO Chart Manager, select Purchase
Licenses then select Collections to Purchase.
4. Select
Load Licenses. The Chart Manager displays a message
"License File ... is found - would you like to process it?" Select Yes to
confirm.
5. The Chart Manager displays another message. Select Yes again to
install the chart collections.
5.12 Install the chart data
When you've purchased your chart collection licenses and any subscriptions, all
the license code information for those charts is uploaded onto your C-Map Chart
Master Key.
You must install the charts on the display unit that is set up as the 8000i master
unit. Any other display units can access the chart collections when the 8000i
master unit is On.
If the 8000i master unit is not Off, the chart collections cannot be accessed and a
gray screen shows the message "Master Unavailable".
To install the charts means to register the data that you have purchased on the
hard disk database (indicated by the licensed collections(s) on your Chart License
Key) so that you can work with charts of the collection.
You can only install the collections you have licenses to in your dongle. Even if you
have more than one dongle with licenses to different chart collections, you can
only use one of the keys at a time.
You are strongly recommended to scan all removable media (such as CDs) for viruses or
corrupt data on a separate device BEFORE connecting or using the removable media with
the 8000i System.