NorthStar Navigation NorthStar 8000i - Manual (Page 31)

Northstar 8000i Operation Manual 31
5. Select
OK to confirm the new setting. The new setting is applied
immediately and stays until you change it again.
6. When you are finished, select – System.
3.12 Select the large scale distance units
You can select from Nautical Miles, Statute Miles, or Kilometers for large scale
distances. Nautical Miles is the default.
To select the large scale distance units:
1. Select
Display.
2. Select
Setup from the control panel.
3. Select
+ Units to display a list of unit specification options.
4. The
Distance Units button shows the current setting. Select the
button if you want to change the setting and a list of choices appears.
5. Select the new setting. The new setting is applied immediately and
stays until you change it again.
6. When you are finished, select – Units.
3.13 Select the small scale distance units
You can select from Yards, Feet, or Meters for small scale distances. Yards is the
default.
To select the small scale distance units:
1. Select
Display.
2. Select
Setup from the control panel.
3. Select
+ Units to display a list of unit specification options.
4. The
Distance Units Small button shows the current setting.
Select the button if you want to change the setting and a list of choices
appears.
5. Select the new setting. The new setting is applied immediately and
stays until you change it again.
6. When you are finished, select – Units.
3.14 Select the temperature units
You can select either Celsius or Fahrenheit for temperature. Fahrenheit is the
default.
To select the temperature units:
1. Select
Display.
2. Select
Setup from the control panel.
3. Select
+ Units to display a list of unit specification options.
4. The
Temperature Units button shows the current setting. Select
the button to change the setting and a list of choices appears.