NorthStar Navigation NorthStar 8000i - Manual (Page 21)

Northstar 8000i Operation Manual 21
2.4 The keys on the remote keypad
The "keys" are physical keys that you can depress. The following keys are shown on
your remote keypad:
A DISPLAY Press once to show the single pane options; press again to show the
page options.
B CONTROL If the control panel is hidden, press once to show it.
On a multi-pane screen, press once to make the next pane the active
pane. Repeat if necessary.
On a multi-pane screen, where you have expanded the active pane to
full size, press to show the next pane at full size. Repeat if necessary.
C Rotary knob Turn left (counter-clockwise) to scroll down or decrease a value or
setting.
Turn right (clockwise) to scroll up or increase a value or setting.
D Cancel Press to cancel or exit.
E Confirm Press to select or confirm.
F 4
directional
arrows
Press or hold down an arrow to move in that direction, or to move the
selection highlight.
These work only for some functions, such as Chart.
G VESSEL Press to return to the selected vessel offset position on your Chart
screen (Look Ahead or Center) or to remove any offset on your Radar
screen.
H IN Press once to zoom in one step.
I OUT Press once to zoom out one step.
J MARK Press to mark the current position with a default event mark icon.
K MOB Press to activate the Man Overboard waypoint.
L VOL Press to adjust the volume of the audio that you're playing.
M ALARM Press to show the alarm log and to set up the alarms.
N Confirm bar Press to select the chosen item on the screen.
O Cursor
control pad
Press an edge to move the cursor in that direction on the screen.