NorthStar Navigation NorthStar 8000i - Manual (Page 28)

28 Northstar 8000i Operation Manual
3.3 Turn the keypad beeps on or off
You can have the 8000i beeps On or Off. On is the default.
To turn the beeps on or off:
1. Select
Display.
2. Select
Setup from the control panel.
3. Select
+ System to display a list of system specification options.
4. The
Keyboard Beeps check box shows the current setting.
5. Select the check box if you want to toggle to the other setting. The
new setting is applied immediately and stays until you change it again.
6. When you are finished, select – System.
Alternatively:
1. If you are using a 12" Display Processor, press the Power key briefly
to display a list of options, then use the directional arrows to select
Key Beep. Use the Confirm or Cancel keys to change the setting.
2. When you are finished, use the directional keys to select Exit, then
select the Confirm key.
3.4 Turn the keypad backlight on or off
You can have the backlight On or Off. On is the default.
To turn the backlight on or off:
1. Select
Display.
2. Select
Setup from the control panel.
3. Select
+ System to display a list of system specification options.
4. The
Keyboard Backlight check box shows the current setting.
5. Select the check box if you want to toggle to the other setting. The
new setting is applied immediately and stays until you change it again.
6. When you are finished, select – System.
Alternatively:
1. If you are using a 12" Display Processor, press the Power key briefly
to display a list of options, then use the directional arrows to select
Key Backlight. Use the rotary knob to change the setting.
3.5 Adjust the volume
To adjust the volume of the audio that you're playing:
1. Select
VOL. The 8000i shows the current volume setting as a line
within a solid box of color and as a percentage.
2. Drag the line, or use the rotary knob to change the volume setting,
then select OK.