NorthStar Navigation NorthStar 8000i - Manual (Page 180)

180 Northstar 8000i Operation Manual
36.2 Play a video in full screen mode
To play the video in full screen mode:
1. If a video is already playing, and you want it to cover the entire screen,
select Full Screen from the video control panel.
2. To show the video control panel again, just touch or click anywhere on
the screen.
36.3 Pause or resume playing a video
To pause or resume playing a video:
1. If a video is already playing and you want to pause playing, select
Pause from the video control panel.
2. To resume play, just select Play.
3. You can toggle between the two settings as often as you want.
36.4 Stop or restart a video
To stop or restart playing a video:
1. If a video is already playing and you want to stop it, select Stop from
the Video JB control panel.
2. If you want to restart the video from the beginning, select Play.
3. You can toggle between the two settings as often as you want.
36.5 Fast forward a video
To fast forward through a video:
If a video is already playing and you want to fast forward through it, just use the
progression track at the bottom of the screen to select the point you want to jump
to.
Alternatively:
1. Select
F/Forward from the control panel.
2. The video starts to fast forward at double speed (2x).
3. Select
F/Forward again if you want to increase the fast forward
speed. You can keep selecting F/Forward until you reach the
maximum fast forward speed (64x). (If you're fast forwarding at 64x and
select F/Forward again, fast forwarding stops and play resumes.)
4. Select
Play to stop fast forwarding and resume playing the video.