Palm 680 User Manual

Page 228

C O M M O N Q U E S T I O N S

222

CAUTION

Failure to use the proper battery

may result in a risk of personal injury or
product damage, and it voids your Treo 680
warranty.

1 Press Power/End

to turn off

the screen.

2 Press the Battery door release button,

and slide the battery door downward
to remove it from your Treo 680.

3 Place a finger in the notch next to the

battery, and lift up the old battery at a
45-degree angle to remove it from the
compartment.

4 Align the metal contacts on the new

battery with the contacts inside the
battery compartment, insert the new
battery into the compartment at a

45-degree angle, and then press it into
place.

IMPORTANT

Use the battery that came

with your Treo 680. Do not use a battery
from another Treo model in your Treo 680.
Similarly, do not use the Treo 680 battery in
another Treo model. Using a battery that is
designed for another Treo model can
damage your Treo 680.

5 Slide the battery door onto the back of

the Treo 680 until it clicks into place.

6 Connect your Treo to the charger or

sync cable to charge the new battery.

Battery door
release button

Battery contacts

Treo 680
contacts

Notch