Palm 680 - Manual (Page 18)

S E T T I N G U P
12
1
CH
AP
T
E
R
1 Plug the AC charger into a wall outlet.
2 Connect the charger cable to the
bottom of your Treo 680. Make sure the
arrow on the connector is facing up,
toward the screen.
3 To confirm that your Treo 680 is
charging, check the indicator light on
your Treo 680.
• Solid red indicates that your Treo 680
is charging.
• Solid green indicates that your Treo
680 is fully charged.
DID YOU KNOW ? You can also trickle charge your
Treo 680 without the AC charger by
connecting it to your computer with the sync
cable. However, it takes longer to charge the
battery without the AC charger, and if your
laptop isn’t plugged into a power source, it can
drain the laptop’s battery. For the quickest
charge time, use the AC charger.
TIP When trickle charging your Treo 680 with
the sync cable, the indicator light may not turn
on. To make sure the battery is charging,
check the onscreen battery indicator.
Indicator light