Palm 680 - Manual (Page 126)

Y O U R C O N N E C T I O N S T O T H E W E B A N D W I R E L E S S D E V I C E S
120
5
CH
AP
T
E
R
with Bluetooth wireless technology, you
can set up your Treo 680 as a wireless
modem using the built-in Bluetooth
technology.
The following procedures describe the
process of setting up your Treo 680 as a
wireless modem using the built-in
Bluetooth technology.
Creating a partnership between your Treo
and your computer
1 Make sure that your computer’s
Bluetooth setting is on and that your
computer is ready to create a Bluetooth
partnership. Check the documentation
that came with your computer to find
and change these settings.
2 On your Treo 680, press Applications
and select Bluetooth .
3 Select Bluetooth On if it is not already
selected, and then select Setup
Devices.
4 Select Trusted Devices.
5 Select Add Device. The discovery icon
appears, indicating that the discovery
process is active.
6 Select your computer from the Trusted
Devices list, and then select OK.
7 Make up a passkey, enter it on the
Bluetooth Security screen, and then
select OK. The passkey can be up to 16
numbers.
NOTE You need this passkey in the next
step, so be sure to write it down exactly.
We recommend that you use a passkey of
16 numbers, where possible, to improve
the security of your Treo. The longer the
passkey, the more difficult it is for the
passkey to be deciphered.
TIP If your computer is not enabled with
Bluetooth wireless technology, you need to
purchase a wireless Bluetooth adapter
accessory for your computer to use this
feature.