Palm 680 - Manual (Page 131)

Y O U R C O N N E C T I O N S T O T H E W E B A N D W I R E L E S S D E V I C E S
125
5
CH
AP
T
E
R
2 Select Bluetooth On.
3 (Optional) Enter a device name that
identifies your Treo 680 when it is
discovered by other Bluetooth devices.
NOTE Use the same device name for all
your Bluetooth connections. If you change
the device name, you need to recreate any
partnerships you already created.
4 Select the Visibility pick list and select
one of the following:
Visible: Enables Bluetooth devices that
are not on your Trusted Devices list to
request a connection with your Treo
680. Your Treo 680 remains accessible
to other devices until you turn this
option off. After you’re done using this
setting, remember to change it back to
Hidden.
Temporary: Enables Bluetooth devices
that are not on your Trusted Devices list
to request a connection with your Treo
680 during the next two minutes. Your
Treo 680 reverts to the Hidden setting
and becomes inaccessible to other
devices after two minutes.
Hidden: Allows only devices with which
you have previously formed a partnership
to request a connection with your Treo 680.
New devices cannot request a connection.
5 Enter the same passkey on your Treo
680 and on the Bluetooth device.
IMPORTANT Some Bluetooth devices,
such as headsets and GPS receivers, have
a preset passkey; if so, you can find the
passkey in the documentation for that
device. Other devices provide a screen
where you enter a passkey that you make
TIP
Use the Visible option only when you need
your Treo 680 to be accessible for an
extended period of time. For short term
accessibility, use the Temporary option.