Intel NETWORK PROCESSOR IXP2800 - Manual (Page 420)

420 Hardware Reference Manual
Intel
®
IXP2800 Network Processor
Performance Monitor Unit
11.4.6.24 SRAM CH3 Events Target ID(001011) / Design Block #(0010)
45 spl_s1_enq_cmd_wph P_CLK single separate
SRAM1 Pull Command Queue FIFO
Enqueue
46 spl_s1_deq_wph P_CLK single separate
SRAM1 Pull Command Queue FIFO
Dequeue
47 spl_s1_cmd_que_full_wph P_CLK Long separate SRAM1 Pull Command Queue FIFO Full
48 spl_s2_cmd_valid_rph P_CLK Long separate SRAM2 Pull Command Queue FIFO Valid
49 spl_s2_enq_cmd_wph P_CLK single separate
SRAM2 Pull Command Queue FIFO
Enqueue
50 spl_s2_deq_wph P_CLK single separate
SRAM2 Pull Command Queue FIFO
Dequeue
51 spl_s2_cmd_que_full_wph P_CLK Long separate SRAM2 Pull Command Queue FIFO Full
52 spl_s3_cmd_valid_rph P_CLK Long separate SRAM3 Pull Command Queue FIFO Valid
53 spl_s3_enq_cmd_wph P_CLK single separate
SRAM3 Pull Command Queue FIFO
Enqueue
54 spl_s3_deq_wph P_CLK single separate
SRAM3 Pull Command Queue FIFO
Dequeue
55 spl_s3_cmd_que_full_wph P_CLK Long separate SRAM3 Pull Command Queue FIFO Full
Table 177. SRAM DP0 PMU Event List (Sheet 3 of 3)
Table 178. SRAM CH3 PMU Event List
Event
Number
Event Name
Clock
Domain
Pulse/
Level
Burst Description
Note:
1. All the SRAM Channel has same event lists.
2. S_CLK = SRAM clock domain
3. P_CLK = PP clock domain
signals that begin with sps_ correspond to S_Push Arb
signals that begin with spl_ correspond to S_Pull Arb
signals that contain _pc_ (after the unit designation) correspond to the PCI target interface
signals that contain _m_ (after the unit designation) correspond to the MSF target interface
signals that contain _sh_ (after the unit designation) correspond to the SHaC target interface
signals that contain _s0_ (after the unit designation) correspond to the SRAM0 target interface
signals that contain _s1_ (after the unit designation) correspond to the SRAM1 target interface
signals that contain _s2_ (after the unit designation) correspond to the SRAM2 target interface
signals that contain _s3_ (after the unit designation) correspond to the SRAM3 target interface