Intel NETWORK PROCESSOR IXP2800 - Manual (Page 399)

Hardware Reference Manual 399
Intel
®
IXP2800 Network Processor
Performance Monitor Unit
70 SPI-4 Packet received P_CLK pulse separate
Indicates that the SPI-4 state machine after
the Receive input FIFO has received an
SPI-4 packet.
71 reserved
72 Data CFrame transmitted P_CLK level separate
Indicates that the transmit buffer state
machine is writing a CSIX Data CFRAME
into the transmit FIFO; One P_CLK cycle
indicates a 32-bit write into the transmit
FIFO.
73 Control CFrame transmitted P_CLK level separate
Indicates the transmit buffer state machine
is writing a CSIX Control CFRAME into the
transmit FIFO; One P_CLK cycle indicates a
32-bit write into the transmit FIFO.
74 SPI-4 CFrame transmitted P_CLK level separate
Indicates the transmit buffer state machine
is writing an SPI-4 Packet into the transmit
FIFO; One P_CLK cycle indicates a 32-bit
write into the transmit FIFO.
75 reserved
76 Tx_Valid[0] is set P_CLK level separate
77 Tx_Valid[8] is set P_CLK level separate
78 Tx_Valid[16] is set P_CLK level separate
79 Tx_Valid[24] is set P_CLK level separate
80 Tx_Valid[32] is set P_CLK level separate
81 Tx_Valid[48] is set P_CLK level separate
82 Tx_Valid[64] is set P_CLK level separate
83 Tx_Valid[96] is set P_CLK level separate
84 Tbuffer Partition 0 empty P_CLK level separate Indicates partition 0 of the tbuffer is empty.
85 Tbuffer Partition 1 empty P_CLK level separate Indicates partition 1 of the tbuffer is empty.
86 Tbuffer Partition 2 empty P_CLK level separate Indicates partition 2of the tbuffer is empty.
87 reserved
88
D_PUSH_DATA write to
TBUF
P_CLK pulse separate
Each write is in units of quadwords (8
bytes).
89
S_PULL_DATA_0 write to
TBUF
P_CLK pulse separate Each write is in units of longwords (4 bytes).
90
S_PULL_DATA_1 write to
TBUF
P_CLK pulse separate Each write is in units of longwords (4 bytes).
91 CSR write P_CLK pulse separate
92
D_PULL_DATA read from
RBUF
P_CLK pulse separate Each read is in units of quadwords (8 bytes).
93
S_PUSH_DATA read from
RBUF
P_CLK pulse separate Each read is in units of longwords (4 bytes).
94 CSR read P_CLK pulse separate
95 CSR fast write P_CLK pulse separate
96
RX Autopush Asserts for
Null and Non-Null
Autopushes
P_CLK pulse separate
Table 157. IXP2800 Network Processor MSF PMU Event List (Sheet 4 of 6)