Interlogix TruPortal - Manual (Page 70)

Configuring the System
58 TruPortal Software User Guide
PIN Only - Out Reader Sets reader to “PIN Only” access mode. Note:
Does not affect door strike.
PIN Only - In/Out
Readers Sets reader to “PIN Only” access mode. Note:
Does not affect door strike.
PIN or Card - In Reader Sets reader to “PIN or Credential” access mode.
Note: Does not affect door strike.
PIN or Card - Out
Reader Sets reader to “PIN or Credential” access mode.
Note: Does not affect door strike.
PIN or Card - In/Out
Readers Sets reader to “PIN or Credential” access mode.
Note: Does not affect door strike.
Entity: Output
On Turns output on.
Off Turns output off.
Pulse On Pulses output on, then back to off, for the selected
duration.
Note: The accuracy of pulse duration varies
depending on the pulse length. See Pulse Duration
Accuracy on page 115.
Pulse Off Pulses output off, then back to on, for the selected
duration.
Note: The accuracy of pulse duration varies
depending on the pulse length. See Pulse Duration
Accuracy on page 115.
Entity: Area
Reset APB Resets APB of all credentials that are in areas to
neutral (i.e free pass).
Unlock - Doors See corresponding door command. Affects all
doors with in or out readers associated with the
area.
Lock - Doors See corresponding door command. Affects all
doors with in or out readers associated with the
area.
Aux Relay On - Doors See corresponding door command. Affects all
doors with in or out readers associated with the
area.
Aux Relay Off - Doors See corresponding door command. Affects all
doors with in or out readers associated with the
area.
Buzzer On - Doors See corresponding door command. Affects all
doors with in or out readers associated with the
area. Note: IPSDCs do not support this action.
Actions Notes