Configuring ip-based single door controllers, The user interface. see, Configuring ip-based single – Interlogix TruPortal User Manual
Page 118: Door controllers, Configuring ip-based, Single door controllers, Configuring ip-based single door, Controllers
Reference
106
TruPortal Software User Guide
Configuring IP-Based Single Door Controllers
Before configuring IP-based Single Door Controllers (IPSDCs) in the User Interface, each IPSDC
must be configured to recognize the IP address of the System Controller. Establishing this network
connection ensures that the IPSDC will be detected when the [Scan for Hardware Changes] button is
used on the System Administration > Devices page.
Here is a high-level overview of the steps involved in configuring an IPSDC:
1.
Install the IPSDC. See the TruPortal IP-Based Single Door Controller Quick Reference for
details.
2.
Follow the steps in
Preparing Client Workstations to Use the Integrated Configuration Tool (ICT)
on page 107. Before an IPSDC can be configured, the IP address of a local client workstation
must be changed so that it is on the same sub-network as the IPSDC.
3.
Review
on page 108 to learn more about the ICT.
4.
Follow the steps in
Using the ICT to Configure IPSDCs
5.
Log into the TruPortal User Interface and access the System Administration > Devices page.
6.
Use the [Scan for Hardware Changes] button so that the System Controller can discover the
IPSDC and add it to the Device Tree. See
7.
Configure the IPSDC in the TruPortal User Interface. See
Following are some additional details about IPSDCs:
Number of retained events in event log
65,000
Device Capacities
Number of doors (base board and dual door controllers) with
readers in / Number of doors with readers in and out
64 / 32
Total number of Dual Door Interface Modules (including built in)
32
Total number of IP-based Single Door Controllers (IPSDCs)
62
Readers (total)
64
Inputs/Outputs
Total number of system inputs (including the System Controller)
132
Total number of system outputs (including the System Controller)
66
Total number of Input/Output Expansion Add-Ons or Input/
Output Expansion Add-On boards
8
DVRs/NVRs
4
Cameras
64
Ethernet ports
2
RS-485 SNAPP bus ports
4
Attribute
Capacity