Avago Technologies MegaRAID SATA 150-4 (523) - Manual (Page 97)

Screen and Option Descriptions 4-13
Version 2.0 Copyright © 2003–2006 by LSI Logic Corporation. All rights reserved.
4.4.8 Configuration Mismatch Screen
A configuration mismatch occurs when the configuration data in the
NVRAM and that on the hard drives are different. You can use the
Configuration Mismatch screen, as shown in
Figure 4.6 , to resolve the
mismatch by doing one of the following:
•
Select Create New Configuration to delete the previous configuration
and create a new configuration
•
Select View Disk Configuration to restore the configuration from the
hard drive
•
Select View NVRAM Configuration to restore the configuration from
the NVRAM
Figure 4.6 WebBIOS Configuration Mismatch Screen