Avago Technologies MegaRAID SATA 150-4 (523) - Manual (Page 116)

5-14 Start the Power Console Plus Utility
Version 2.0 Copyright © 2003–2006 by LSI Logic Corporation. All rights reserved.
5.4.2 Power Console Plus Menus
This section describes the options available from the Power Console Plus
menu bar.
5.4.2.1 Configuration Menu
Table 5.3 describes the Power Console Plus Configuration menu options.
Table 5.3 Power Console Plus Configuration Menu
Option Description
Wizard This option allows you to configure physical arrays and logical drives. You can
select Custom or Automatic array configuration. If you select Automatic, the
Wizard examines the system and automatically configures an optimal RAID
system. If you select Custom, you determine the RAID configuration. Refer to
Section 5.5.3, “Running the Configuration Wizard,” on page 5-20 for details.
Display This option displays the current RAID configuration.
Print This option prints the current RAID configuration.
Save This option saves the current RAID configuration.
Load This option loads a saved RAID configuration.
Clear Configuration This option erases the current RAID configuration. After choosing this option,
you must configure a new RAID array.
Exit This option quits the Power Console Plus utility.