Avago Technologies MegaRAID SATA 150-4 (523) - Manual (Page 85)

MegaRAID Configuration Software User’s Guide 4-1
Version 2.0 Copyright © 2003–2006 by LSI Logic Corporation. All rights reserved.
Chapter 4
WebBIOS
Configuration Utility
This chapter describes the WebBIOS Configuration Utility and consists
of the following sections:
•
Section 4.1, “General Description”
•
Section 4.2, “Quick Configuration Steps”
•
Section 4.3, “Starting the WebBIOS Configuration Utility on the
Host Computer”
•
Section 4.4, “Screen and Option Descriptions”
•
Section 4.5, “Configuring RAID Arrays and Logical Drives”
4.1 General Description
The WebBIOS Configuration Utility (CU) provides a Web-based utility to
configure and manage RAID volumes. The utility configures disk arrays
and logical drives. Its operation is independent of the operating system
because the utility resides in the MegaRAID BIOS.
The WebBIOS CU performs the following actions:
•
Displays adapter properties
•
Scans devices
•
Creates physical arrays
•
Defines logical drives
•
Displays logical drive properties
•
Initializes logical drives
•
Checks data for consistency