Avago Technologies MegaRAID SATA 150-4 (523) - Manual (Page 139)

MegaRAID Service Monitor Event Types A-5
Version 2.0 Copyright © 2003–2006 by LSI Logic Corporation. All rights reserved.
Table A.5 describes the SAF-TE messages.
Table A.5 Messages for SAF-TE Compliant Boxes
Event Type Severity Level Log Messages
– Informational Adapter # Channel # Target # [Fans= #, Power Supplies= #,
Slots= # & Temperature Sensors= #] : SAF-TE Information
Temperature is over
threshold or back to
normal Fan is not
operational or its
status has changed
since last check Warning Temperature Sensor # is ?? Degree: Out of Range
Warning Temperature Sensor # is Normal
Informational Status of Fan # =0x##: Operational
Warning Status of Fan # =0x##: Malfunctioning
Warning Status of Fan # =0x##: Unknown Status
Warning Status of Fan # =0x##: Status Not Reportable
Device slot ID
number changed Warning Device Slot # ID=#: The associated physical drive ID has changed.
Physical Drive # is Removed/Power Off. Physical Drive # is
Added/Power On.
These messages are not currently available.
Power supply is not
operational or its
status has changed
since last check Informational Status of Power Supply #=0x##: Operational and On
Warning Status of Power Supply #=0x##: Operational and Off
Warning Status of Power Supply #=0x##: Malfunctioning and
Commanded On
Warning Status of Power Supply #=0x##: Malfunctioning and
Commanded Off
Warning Status of Power Supply #=0x##: Not Present
Warning Status of Power Supply #=0x##: Present
Warning Status of Power Supply #=0x##: Unknown Status
Warning Status of Power Supply #=0x##: Status Not Reportable