Avago Technologies MegaRAID SATA 150-4 (523) - Manual (Page 52)

3-4 BIOS Configuration Utility and MegaRAID Manager
Version 2.0 Copyright © 2003–2006 by LSI Logic Corporation. All rights reserved.
3.3 Configuration Utility Menu
Figure 3.1 shows the menu tree for the BIOS Configuration Utility and
MegaRAID Manager. The following sections describe each menu item.
Figure 3.1 MegaRAID Configuration Utility Menu Tree
(Section 3.3.1 )
Configure
Initialize
Objects
Adapter
View/Add Configuration
Specify Boot Drive
Clear Configuration
FlexRAID PowerFail
Disk Spin Up Timings
Initialize
Check Consistency
Rebuild
Clear
Force Online
Make Hot Spare
View Drive Information
Logical Drive
Physical Drive
Force Offline/Remove HSP
View Rebuild Progress
Check Consistency
Rebuild
Clear
Channel Termination State
New Configuration
Easy Configuration
View/Update Parameters
Battery Information
Select Adapter
Cache Flush Timings
Rebuild Rate
Other Adapter Information
Factory Default
Disable BIOS
Auto Rebuild
SCSI Command Qtagging
Backup Module
Battery Pack
Temperature
Voltage
Fast Charging
(Section 3.3.2 )
(Section 3.3.3 )
(Section 3.3.4 )
(Section 3.3.5 )
(Section 3.3.6 )
(Section 3.3.8 )
StripeSize
Write Policy
Read Policy
Cache Policy
Drive State
Reset Battery Charge Counter
Clear Configuration
Fast Initialization
#Stripes
RAID
Size
Channels
No of Cycles
Transfer Speed Option
Reconstruct (Section 3.3.7 )
Emulation
Initiator ID
Boot Time BIOS Options
Patrol ReadOptions
Patrol Read Mode
Patrol Read Control
Patrol Read Status
BIOS Stops on Error
BIOS Echoes Message
BIOS Configuration Autoselection
SCSI Transfer Rate