RIGOL DG5000 Series - Manual (Page 67)

Chapter 3 Arbitrary Waveform Output RIGOL
User’s Guide for DG5000 3-7
Stored Waveform
Select arbitrary waveforms stored in internal non-volatile memory (C Disk) or external
memories (D Disk or E Disk).
Press this softkey to enter the Store/Recall Interface and the backlight of the
Store/Recall key on the front panel is illuminated. Please select and read the desired
arbitrary waveform file. For more details, please refer to “Store and Recall”.
Waveform data in volatile memory will be changed after the file is read. To return
arbitrary waveform setting interface, press the Arb.
Volatile Waveform
Select arbitrary waveform currently stored in the volatile memory. Note that this menu
would be unavailable if there is no waveform data in volatile memory currently. To fill
up the volatile memory, you can create a waveform through “Create New” or select a
waveform from “Built-In” or “Stored Wforms”.