RIGOL DG5000 Series - Manual (Page 162)

RIGOL Chapter 10 Advanced Operation
User’s Guide for DG5000 10-12
Language
At present, DG5000 supports Chinese/English Menu, Help, Interface and Input
Method.
Press Utility  System  Language to select the desired language. The setting is
stored in nonvolatile memory and will not be influenced by “Preset”.
Power On Setting
Select the configuration, “Default” or “Last”, which is used at when the instrument is
powered on next time. The default setting is “Default”.
 Last: include all the system parameters, except output configuration, clock source
and the connect state of the external module.
 Default: denotes the factory default except some parameters (such as:
Language).
Press Utility  System  Power On to select desired configuration type. The
setting is stored in nonvolatile memory and will not be influenced by “Preset”.
Restore Default
Restore the generator to its default configuration.
Press Utility  System  Preset  OK, the Utility backlight goes out. The
instrument switches to Sine mode. The default values are shown in the table below.
Notice that the items marked with “*” depend on the setting when factory delivery
and are related to user setting during their use and will not be influenced by Preset
operation.