RIGOL DG5000 Series - Manual (Page 160)

RIGOL Chapter 10 Advanced Operation
User’s Guide for DG5000 10-10
Channel Copy
DG5000 dual-channel model supports parameters copy between its two channels.
Channel copy function enables to copy the parameters (such as waveform shape,
frequency and amplitude) and output setting (e.g. resistance and polarity) of one
channel to the other channel.
Press the Utility key at the front panel, use
to open the 2/2 menu page and
press Copy Channel to enter Channel copy interface.
Press CH1->CH2 to copy the CH1 parameters to CH2.
Press CH2->CH1 to copy the CH2 parameters to CH1.
Key points:
 Channel coupling and channel copy are mutually exclusive. When channel
coupling is enabled, the menu Copy Channel will be grayed out and disabled.
 All the basic waveforms can be copied except user-defined arbitrary waveform.