RIGOL DG5000 Series - Manual (Page 194)

RIGOL Chapter 10 Advanced Operation
User’s Guide for DG5000 10-44
To Set Host Name
Consult your network administrator whether you need to use a host name and what is
the name.
Press Host Name and use the numeric keyboard and direction keys to enter the host
name, with up to 16 length, which could consist of letters, numbers, dot and dash.
The setting is stored in the non-volatile memory.
To Set Domain Name
Consult your network administrator whether you need to use a domain name and
what is the name.
Press Domain Name and use the numeric keyboard and direction keys to enter the
domain name, with up to 16 length, which could consist of letters, numbers, dot and
dash. The setting is stored in the non-volatile memory.
Default Configuration
Press Default Config to restore the LAN parameters to default value. By default,
DHCP and AutoIP are enabled and ManualIP is disabled.
Current Configuration
Press Current Config to examine the MAC address of the current instrument, the
current LAN parameters and LAN status information.
OK
Press Ok to enable the current setting of LAN parameters.