RIGOL DG5000 Series User Manual
Page 182
RIGOL
User’s Guide for DG5000
10-32
Press BitOrder to select LSB or MSB.
The bit order of data output depends on the protocol selected. RS232
protocol always uses LSB order, SPI and IIC protocols always use MSB order,
while PO protocol can use LSB or MSB.
LSB: Least Significant Bit. For example, when the data is 00001111, D0
outputs the least bit 1 and D7 outputs the most bit 0.
MSB: Most Significant Bit. For example, when the data is 00001111, D0
outputs the most bit 0 and D7 outputs the least bit 1.
Press Rate and use the knob or number keypad to input the desired rate and
the range available is from 1bps to 100Mbps.