RIGOL DG5000 Series - Manual (Page 218)

RIGOL Chapter 14 Appendix
User’s Guide for DG5000 14-2
Appendix B: Specifications of Power Amplifier
Unless otherwise noted, all the specifications can be guaranteed if the following two
conditions are met.
 The generator has been working continuously for 30 minutes at specified
temperature.
 All the specifications are guaranteed unless those marked with “typical”.
Signal Input
Input Impedance
50kΩ
Built-in Bias Voltage (Output
Equivalent) +/-12V
External Input +/-10Vmax (Gain: X1)
+/-1.25Vmax (Gain: X10)
Power Amplifier Specifications
Running Mode
Constant Voltage
Gain Switch between 10V/1V and 10V/10V (DC Gain Error: <5%)
Polarity Switch Align/Invert
Effective Value of Sine
Output Power ( RL=7.5Ω) 10W (Typical Value, Input Sine, 100kHz, X10)
Output Voltage 12.5Vpeak (Input Sine, 100kHz)
Output Current 1.65Apeak (Input Sine, 100kHz)
Output Impedance <2 Ohm
Full Power Bandwidth [1] DC~1MHz
Output Slew Rate [2] ≥80V/µs (Typical)
Overshoot <7%
Bias Voltage Specification
Bias Voltage Gain Error
5%±100mV
Others
Power Supply
DC 12V±5%, 4Apeak
Output Protection Output Overcurrent Protection, Internal Temperature Abnormity
Protection
Operating Temperature [3] 0 ℃～+35 ℃
Dimensions (W×H×D) 142.2mm×48.1mm×215.4mm
Net Weight 850g±20g