RIGOL DG5000 Series - Manual (Page 172)

RIGOL Chapter 10 Advanced Operation
User’s Guide for DG5000 10-22
Test Calibration
Press Utility  Test/Cal to open the test calibration interface. Users could view the
self-test information. Self-calibration by users is not recommended. If you want to
perform self-test and calibration, please contact
RIGOL.
1. Self Test
When correct calibration code is input, this menu is available. After pressing this
key, the instrument executes self-test. The operation lasts about 3 s.
2. TestInfo
Press this key to examine the instrument self-test information.
3. Secure Code
Press this key and use the knob and direction key to input correct calibration
code.
4. Secure
The default is “On”. When correct calibration code is input, the menu changes to
“Off”.
5. Manual Calibration
The calibration menu is available and the operation can be implemented only
when correct calibration code is input.
6. Preset
When correct calibration code is input, this menu is available. After pressing this
key, the instrument restores the default calibration values.