RIGOL DG5000 Series - Manual (Page 125)

Chapter 7 Burst Output RIGOL
User’s Guide for DG5000 7-3
N Cycle Burst could be triggered by “Internal”, “External” or “Manual” source. You can
also set “Start Phase”, “Burst Period” (internal trigger), “Delay”, “Trigger Input”
(external trigger) and “Trigger Output” (internal and manual triggers).
Infinite Burst
In Infinite mode, the cycle number of the waveform is set as an infinite value. The
generator outputs a continuous waveform after receiving trigger signal. Waveform
functions which support Infinite Burst are Sine, Square, Ramp, Pulse and arbitrary
waveforms (except DC).
When Burst is enabled, press Type to select “Infinite”. In Graphic Mode, an infinite
cycle pulse sketch will appear on the screen.
Infinite Burst could be triggered by “External” or “Manual” source. You can also set
“Start Phase”, “Delay”, “Trigger Input” (external trigger) and “Trigger Output”
(manual trigger).