RIGOL DG5000 Series User Manual
Page 215
RIGOL
User’s Guide for DG5000
13-7
Trigger Source
Internal, External or Manual
Marker
Falling edge of Sync signal (programmable)
Programming Time
Configuration Times (Typical)
USB2.0
LAN
GPIB
Function Change
500ms
510ms
510ms
Frequency Change
50ms
50ms
50ms
Amplitude Change
300ms
310ms
310ms
Select User Arb
500ms
510ms
510ms
Arb Download Times (Binary Transfer)
1 Mpts/s
Note: Download times do not include setup or output time.
Trigger Characteristics
Trigger Input
Level
TTL-compatible
Slope
Rising or falling (selectable)
Pulse Width
> 50 ns
Latency
Sweep: <100 ns (typical)
Burst: <300 ns (typical)
Trigger Output
Level
TTL-compatible
Pulse Width
> 60 ns (typical)
Maximum Rate 1MHz
Clock Reference
Phase Offset
Range
0° to 360°
Resolution
0.001° (arb waveform), 0.03° (other waveforms)
External Reference Input
Lock Range
10 MHz ± 50 Hz
Level
80 mVpp to 10 Vpp
Lock Time
< 2 s
Internal Reference Output
Frequency
10 MHz ± 50 Hz