RIGOL DG5000 Series - Manual (Page 189)

Chapter 10 Advanced Operation RIGOL
User’s Guide for DG5000 10-39
To Install the Option
DG5000 provides frequency hopping module to spread frequency spectrum. To order
this option (DG5-FH), please contact
RIGOL and acquire the option installation file.
According to the following steps, you can install this option.
Option Installation Steps:
 Save the option installation file to USB storage device.
 Start-up the instrument and insert USB storage device. And then press
Store/Recall to enter the storage and recall interface.
 Refer to “Store and Recall” to read the option installation file according to the
steps below in the storage and recall interface.
Select “D disk”  set the file type to “All File”  select the above file  press
Read.
If this option is installed successfully, the corresponding prompt message will be
displayed.