RIGOL DG5000 Series - Manual (Page 173)

Chapter 10 Advanced Operation RIGOL
User’s Guide for DG5000 10-23
To Use the Power Amplifier (Option)
DG5000 supports the connection with and parameter configuration of the Power
Amplifier (PA), which can amplify and then output the signal. To use external power
amplifier, please install the PA1011 option.
PA1011 is one of the options provided for
RIGOL DG Series Function/Arbitrary
Waveform Generators, with up to 1 MHz full power bandwidth and higher than 80 V/µs
slew rate. It can be connected with all the DG series products to quickly build test
platform and can also be used as an independent power amplifier to be used with
other signal generators.
Main Features of PA1011:
 Flexible and easy communicate with
RIGOL DG Series Function/Arbitrary
Waveform Generators or PC software through the USB interface;
 Enables to set the Gain (x1 or x10), Polarity (Normal or Invert), Output offset and
the output status in connection with its software;
 Up to 50kΩ input impedance;
 The integrated output protection circuit (over-current protection and internal
temperature abnormal protection) provided with ensures the instrument is
working stably, reliable and safely;
 Compact size, easy to carry and use.