RIGOL DG5000 Series - Manual (Page 42)

RIGOL Chapter 1 Quick Start
User’s Guide for DG5000 1-18
Installation Tool
PH2 Phillips Screwdriver (recommended).
Space Requirements for Installation
The following requirements must be fulfilled by the machine cabinet in which the
instrument is mounted.
 Dimension of the machine cabinet must be standard 19-inch.
 At least 3U (133.5 mm) space should be provided by the machine cabinet.
 The depth inside the machine cabinet should not be less than 530 mm.
The dimension of the instrument after being mounted is shown below.