Yaskawa Sigma-5 User Manual: Design and Maintenance - Rotary Motors - Manual (Page 223)

6.12 Write Prohibited Setting (Fn010)
6-21
Utility Functions (Fn
)
6.12 Write Prohibited Setting (Fn010)
Prohibiting writing prevents writing parameters by mistake.
The following operations can be write-protected using the Fn010 parameter.
• Parameter settings from the digital operator (Pn )
• Utility functions shown in (1) Utility Functions That Can Be Write-protected (Fn )
(1) Utility Functions That Can Be Write-protected
Note 1. : Possible, ×: Impossible
2. If the write prohibited setting (Fn010) is enabled, “NO-OP” is displayed on the status display of the Digital Oper-
ator if the user attempts to execute the above utility functions. To execute these utility functions, set Fn010 to
write permitted by using the procedure shown in (2) Operating Procedure.
Function No. Function
Write
Prohibited
Setting
Reference
Section
Fn000 Alarm history display × 6.2
Fn002 JOG operation 6.3
Fn003 Origin search 6.4
Fn004 Program JOG operation 6.5
Fn005 Initializing parameter settings 6.6
Fn006 Clearing alarm history 6.7
Fn008 Absolute encoder multi-turn reset and encoder alarm reset 4.5.4
Fn00C Manual zero adjustment of analog monitor output 6.8
Fn00D Manual gain adjustment of analog monitor output 6.9
Fn00E Automatic offset-signal adjustment of motor current detection signal 6.10
Fn00F Manual offset-signal adjustment of motor current detection signal 6.11
Fn010 Write prohibited setting − 6.12
Fn011 Servomotor model display × 6.13
Fn012 Software version display × 6.14
Fn013
Multi-turn limit value setting change when a Multi-turn Limit
Disagreement alarm occurs
4.5.7
Fn014 Resetting configuration error of option module 6.15
Fn01B Vibration detection level initialization 6.16
Fn01E Display of SERVOPACK and servomotor ID × 6.17
Fn01F Display of servomotor ID in feedback option module × 6.18
Fn020 Origin setting × 6.19
Fn030 Software reset × 6.20
Fn200 Tuning-less level setting 5.2.2
Fn201 Advanced autotuning 5.3.2
Fn202 Advanced autotuning by reference 5.4.2
Fn203 One-parameter tuning 5.5.2
Fn204 Anti-resonance control adjustment function 5.6.2
Fn205 Vibration suppression function 5.7.2
Fn206 EasyFFT 6.21
Fn207 Online vibration monitor 6.22