Yaskawa SGDH Linear Sigma Series - Manual (Page 78)

3 Specifications and Dimensional Drawings
3.7.2 SGLF†-35 Linear Servomotors
3-30
(2) Magnetic Way: SGLFM-35†††A
Note: 1. Multiple SGLFM-35 A magnetic ways can be connected. Connect magnetic ways so that the refer-
ence marks match one on the other in the same direction as shown in the figure.
2. The magnetic way may affect pacemakers. Keep a minimum distance of 200 mm from the magnetic way.
L1
L2
(Gap1)
Assembly Dimensions
Reference marks
Reference mark
S S N S S N N N
(Two φ4 (φ0.16) marks are engraved.)
Reference mark
MADE S/N O/N
TYPE:
YASKAWA
Nameplate
S/N O/N
TYPE: MADE IN JAPAN DATE
YASKAWA
Coil assembly
(L3)
9.9°
32.2
-0.2
0
-0.3
-0.1
6
(0.24)
4 (0.16)
34
(1.34)*
45 ± 0.1
(1.77 ± 0.004 )
The height of screw head must be 4.2 (0.17) max.
30
(1.18)*
25
(0.98)*
55 (2.17)*
60 (2.36) 51 (2.01) 30
(1.18)
30
(1.18)*
4.5 (0.18)*
4.5
(0.18)*
(1.27 ) -0.01
0
54 (2.13)
2 ×N-φ4.8 (φ0.19) mounting holes
32.2 (1.27)*
* Reference length
Units: mm (in)
10
(0.39)
54 (2.13)*
Magnetic Way
Model SGLFM-
L1 -0.1
-0.3
L2 (L3) N
Approx.
Mass
kg (lb)
35324A
324
(12.80)
270 (10.63)
(54 (2.13) × 5 (0.20))
334.4
(13.17)
6
(0.24)
1.2
(2.65)
35540A
540
(21.26)
486 (19.13)
(54 (2.13) × 9 (0.35))
550.4
(21.67)
10
(0.39)
2
(4.41)
35756A
756
(29.76)
702 (27.64)
(54 (2.13) × 13 (0.51))
766.4
(30.17)
14
(0.55)
2.9
(6.39)