Yaskawa SGDH Linear Sigma Series - Manual (Page 167)

7.1 Linear Servomotor Installation
7-3
7
• When unpacking and installing magnetic way, check that no metal fragments or other magnetic objects are
present considering the magnetic attraction of the magent track.
Failure to observe this caution may result in injury or damage to the magnetic way's magnets.
• Do not use the magnetic way near metal or other magnetic objects.
Failure to observe this caution may result in injury.
• Do not place clocks, magnetic cards, floppy disks, or measuring instruments close to the magnetic way.
Failure to observe this caution may result in malfunction or damage to these items by the magnetic force.
• Do not carry the magnetic way by its magnet protection cover.
Failure to observe this caution may result in injury by the cover’s edge or the shape of the cover may become distorted.
• When removing the dummy plate for reducing magnetic force used for the SGLFM magnetic way, pay
attention to the magnetic attraction of the magnetic way. Do not place the removed plate close to the
magnetic way.
Failure to observe this caution may result in injury or damage to the magnetic way’s magnets or the magnet protection
cover.
• Keep fingers away from the gap between magnetic ways when connecting multiple magnetic ways together.
Otherwise fingers may become jammed due to the magnetic attraction between magnetic ways, resulting in injury.
When joining magnetic ways together, place the second magnetic way temporarily in line and at least 30 mm apart
from the first magnetic way.
Next, after aligning the angles of the bolt sockets on the magnetic way's connecting surfaces, rotate the second mag-
netic way to join the first magnetic way. Connect the second and first magnetic ways together. And after confirming the
mounting position, secure the second magnetic way using bolts. Make sure that fingers do not get jammed due to the
magnetic attraction between magnetic ways.
CAUTION
Cover
Magnetic way
First magnetic way
Second magnetic way
Align the angle.
Rotate the magnetic way.