Yaskawa SGDH Linear Sigma Series - Manual (Page 266)

9 Operation
9.3.1 Servo ON Command from the Host
9-22
9.3 Trial Operation for Linear Servomotor without Load from Host
Reference
Check that the linear servomotor move reference or I/O signals are correctly set from the host controller to the
SERVOPACK. Also check that the wiring and polarity between the host controller and SERVOPACK, and the
SERVOPACK operation settings are correct. This is final check before connecting the linear servomotor to the
machine.
9.3.1 Servo ON Command from the Host
The following circuits are required: External input signal circuit or equivalent.
Speed Control
(Standard Setting)
[Pn000=n.††0†]
Position Control
[Pn000=n.††1†]
47
CN1
+24V
/S-ON
P-OT
N-OT
V-REF
40
42
43
5
0V
47
CN1
+24V
/S-ON
P-OT
N-OT
PULS
40
42
43
7
SIGN 11
0V