HEIDENHAIN IK 5394-3D - Manual (Page 569)

A-25
Quadra-Chek ® 5000
Filtering selected points from the part data
Data points can be selectively filtered out of fit operations to evaluate the
influence of specific points on fit results, or to eliminate the effects of un-
wanted measurement artifacts.
Select the point(s) to be filtered, then
right-click anywhere in the Measure
Profile window to display the Measure
Profile menu.
Click on Filter to filter out the selected
points, then click Fit to perform a new
fit operation. The new results will not
include the filtered points.
Filtering the worst (form error) point from the part
data
Right-click anywhere in the Measure Profile window to dis-
play the Measure Profile menu. Click Filter Worst to exclude
the data point with the greatest form error from the next fit
analysis.
Click Filter Worst repeatedly to filter a group of data points
with the greatest form errors.
Click Fit to perform a new fit operation. The new results will
not include the filtered points.
Unfiltering (restoring) filtered data points
Right-click anywhere in the Measure Profile window to dis-
play the Measure Profile menu. Click Unfilter All to restore
all previously filtered data points to the data cloud for the
next fit analysis.
Select points to be filtered out of a fit
analysis
Click Filter... to remove selected points from the next fit analysis