HEIDENHAIN IK 5394-3D - Manual (Page 533)

6 - 83
Quadra-Chek ® 5000
Motion mouse screen
The 3-button mouse can be used to control movement on the X, Y and Z axes
when manual control is required. The Motion mouse screen contains tools for
specifying X, Y and Z axis movement direction and sensitivity. The Z-axis can
also be configured to include fine and coarse movements.
Specifying X and Y axis movement sensitivity
The stage can be moved in the XY plane
by clicking and dragging the Image with
the middle mouse button in the video
window. The amount of X and Y axis
stage movement is expressed as a scale
factor of the cursor movement in the
video window. As shown in this ex-
ample, a scale factor of 1.0 will cause
the stage to move an XY distance on the
screen equal to the distance moved by
the cursor.
The scale factor can be a fraction or a
multiple of the cursor movement on the
screen. Enter the desired value from 0.1
to 5.0 directly
into the Scale
factor data
field.