HEIDENHAIN IK 5394-3D - Manual (Page 529)

6 - 79
Quadra-Chek ® 5000
Setup Tools/CNC screens
Joystick screen
Use the joystick screen to enable, calibrate, and configure motions controlled by
the joystick on all axes.
Enabling/Disabling joystick motion control
Check or clear the Enable box to enable or disable joystick motion control for
the designated axes.
Viewing current position values
The current joystick position is indicated by the Current Values fields. These
values can range from a low of 0 to a high of 5.0. The center of each axis at rest
should be near 2.5. The Current values displays provide use-
ful information for joystick performance evaluations and
troubleshooting.