HEIDENHAIN IK 5394-3D - Manual (Page 230)

3-58
Chapter 3 Probes
Edge Teaching
Use the teach button on the VED toolbar to teach edge characterization. There
are three edge algorithms used by the QC-5000. They are as follows:
•
First
•
Strongest
•
Auto
Select first to instruct the QC-5000 to select the first edge meeting the mini-
mum edge strength.
Select strongest to find all edges in the scan direction and select the strongest
edge found.
Select auto to instruct the QC-5000 to re-calculate the minimum edge strength
each time the probe tool is fired.