HEIDENHAIN IK 5394-3D - Manual (Page 239)

3-67
Quadra-Chek ® 5000
Check the auto change box for probes interchangeable with other groups. If
using an indexable or friction probe, check the appropriate box. Otherwise,
proceed to step 4.
Step 4
Enter the desired probe direction distance. This is the distance the probe must
travel in a direction prior to making contact with the part.
NOTE
Probe direction distance determines in which direction probe
compensation is applied.
Step 5
Click OK in the dialog box.
The new group appears in the probe library as shown.