HEIDENHAIN IK 5394-3D - Manual (Page 519)

6 - 69
Quadra-Chek ® 5000
Encoder screen
Use the encoder screen to specify encoder resolution, units of measure, count
direction and reference mark type.
Specifying encoder resolution
Enter the resolution specification of the
encoders used with your system into the
X, Y and Z Resolution fields.
Specifying encoder unit of measure
Check the mm box for metric encoders, or uncheck the mm box for encoder
output values in inches.
Specifying encoder count direction
Check or uncheck the reverse boxes to achieve the desired DRO count direc-
tions.