HEIDENHAIN IK 5394-3D - Manual (Page 516)

6 - 66
Chapter 6 System Setup
Speed toggle
Pressing the button toggles all Axis motor speeds between fast and slow.
NOTE
Axis motor speeds are defined in the CNC Tools screen.
Motors off
Pressing the button toggles all Axis motors on or off. This function duplicates
the Motors Off found in the Tools menu.
Swap Z joystick
Pressing the button toggles the vertical
joystick motion between the Y-axis and
the Z-axis.
Swap Z digital positioner
Pressing the button toggles the vertical
trackball motion between the Y-axis and
the Z-axis.
Swap Q joystick
Pressing the button toggles the vertical joystick motion between the Y-axis and
the rotary Q-axis.
Go to here
Pressing the button inserts a Goto Here step into
the current line of the program being recorded.
This function duplicates the Goto Here found
on the program toolbar.
Pause prg
Pressing the button pauses the current program
execution.
This function duplicates the Pause found on the
program toolbar.
Run prg
Pressing the button runs the current program
starting from the current step, and is typically
used to resume program execution after a pause.
This function duplicates the Run
Program From Current Step found
on the program toolbar.