HEIDENHAIN IK 5394-3D - Manual (Page 494)

6 - 44
Chapter 6 System Setup
Showing program complete messages
Check the Show program completion
messages box to display the program com-
plete message each time a program ex-
ecution is complete.
Showing VED tools in the video window in max speed mode
VED tools can be shown in the video window in the max speed mode as points
are collected, or can be hidden to further accelerate program execution.
Check the Display VED tools... box to
display VED tools during program ex-
ecution.
NOTE
The max speed mode is discussed in detail in Chapter 6:
Programming.
Enabling collision avoidance for touch probes
Collision avoidance separates XY motion from Z motion so that:
• For motions including + Z movements, the Z-axis movement is
executed (straight up), then the XY movement is executed
• For motions including - Z movements, the XY movement is
executed, then the Z-axis movement is executed (straight down)
Check the Use collision avoidance... box
to enable collision avoidance CNC
moves.
Halting execution for failure to select features
Feature constructions recorded in programs require the successful selection of
parent features. Under certain circumstances, it is possible that one or more
parent features will be missing due to feature measurement irregularities. Pro-
gram execution can automatically be halted if a parent feature is missing from a
construction to avoid new feature construction inaccuracies and omissions.
Check the Failed select features... box to halt program execution when one or
more features required for a new feature
construction are missing.