HEIDENHAIN IK 5394-3D - Manual (Page 481)

6 - 31
Quadra-Chek ® 5000
Moving video charts with a mouse
The video window origin is located in the top-left corner of the video window.
When a video chart is loaded, the video chart origin is positioned over the video
window origin. This initial alignment can sometimes cause portions of the
imported chart to fall outside the boundaries of the video window.
Check the Allow video charts... box to
allow repositioning of the chart using the
mouse.
Moving video charts with the part
Video charts are positioned over part features with the mouse. By default, if the
part position is changed, the chart position must be realigned manually using
the mouse. This is acceptable for small parts, but when parts and associated
charts extend beyond the field of view, the part position will usually be changed
repeatedly and manual realignments would reduce throughput.
Check the Make video charts... box to automatically maintain chart-to-part align-
ment as the part is moved.
Specifying video camera image type
Check the Image type radio button that corresponds to the output format of your
video camera system.