HEIDENHAIN IK 5394-3D - Manual (Page 543)

6 - 93
Quadra-Chek ® 5000
3 You will be instructed to measure a point on the top-inside of the rack.
Click OK and probe the first point
on the probe rack.
4 You will be instructed to measure a point on the front of the rack. Click
OK and probe the second point on
the probe rack.
5 You will be instructed to measure a point on the left-inside wall of the rack.
Click OK and probe the third point
on the probe rack.
6 You will be informed that the system is ready to create a reference frame.
Click OK to continue.