HEIDENHAIN IK 5394-3D - Manual (Page 470)

6 - 20
Chapter 6 System Setup
Enable/Disable raised edges for toolbar buttons
Toolbar buttons can be displayed with
or without raised button edges. Check
or clear the Display buttons without
raised edges box as desired.
Allows/Prohibit toolbar docking
Toolbars can be docked to the inside
edges of QC5000 windows. Check or
clear the Allow toolbars... box as desired.
Mapping parts to a toolbar
Parts can be mapped to toolbar buttons when more structured or automated
operator environments are required. To map a part to a toolbar:
1 Click the toolbar that
will include the new part
button.
2 Click the Map Part
button.
The Map Part to Button
file dialog box will be dis-
played.
3 Click the file name of
the desired part and click
Open.
You will be asked if you
wish to have the part’s pro-
gram run automatically
when the button is
pressed.
Click Yes or No as desired.
Without raised edges
With raised edges
Docking the VED toolbar...
inside the Video window